Follow us
Talk to an engineer+86 187 9241 5859
Get A Quote
Lithium Polymer Battery

LP301630 110mAh

Li-polymer (LP) UN38.3 & MSDS MOQ 3,000 pcs per model for custom sizes; 500 pcs for existing tooling Samples available
Factory-direct pricing. Send your target quantity and we will quote with freight options —reply within 8 working hours.
Voltage
3.7V
Capacity
110mAh
Chemistry
Li-polymer (LP)
T x W x L
3.0mm x 16.2mm x 30.3mm
  • UN38.3 test summary, MSDS and transport report supplied with every shipment
  • 100% capacity-graded and internal-resistance sorted before packing
  • OEM / ODM: custom tabs, connectors, PCM, labelling and packaging
  • Ships as UN3480 / UN3481 dangerous goods with UN-certified packaging

LP301630 110mAh specification

ModelLP301630 110mAh
CategoryLithium Polymer Battery
ChemistryLi-polymer (LP)
Nominal voltage3.7V
Nominal capacity110mAh
End voltage3.0V
Thickness (max)3.0mm
Width (max)16.2mm
Length (max)30.3mm
Internal resistance<=60(mΩ)
Cycle lifeMore than 500 cycles
Operating temperature-20 °C to +60 °C
ProtectionOptional Japan IC + MOS protection circuit

Values are typical at 25 °C unless stated otherwise. Request the official datasheet for guaranteed tolerances and test conditions.

Ordering summary

ModelLP301630 110mAh
Minimum order quantity3,000 pcs per model for custom sizes; 500 pcs for existing tooling
Sample lead time7–10 working days
Production lead time20–25 days after sample approval
CertificationUN38.3, MSDS, IEC 62133-2, CE, RoHS, REACH, UL 1642 (selected models)
CustomisationCustom dimensions, capacity, PCM, connectors, wire length and private-label printing
Payment termsT/T, L/C at sight, Trade Assurance
Trade termsFOB / CIF / DDP

About the LP301630 110mAh

The LP301630 110mAh is a 110mAh 3.7V Li-polymer (LP) cell from our Lithium Polymer Battery range. It is produced to the specification below and supplied either as a bare cell or built into a custom pack with tabs, wire harness, connector and protection circuit to match your product.

Typical buyers of this model are importers, distributors and manufacturers who need a stable, repeatable specification across repeat orders. Every batch is capacity graded and internal-resistance sorted, and the test record can be attached to your shipping documents. If you need a different capacity, dimension or termination, we can quote a customised version of the same cell.

Why buyers choose this model

  • Ultra-thin profile from 3.0 mm
  • Custom dimensions without new tooling cost in many cases
  • Aluminium-laminate pouch with optional protection circuit
  • Connector and wire length built to your drawing

Typical applications

LP301630 110mAh is commonly designed into the following products. If your device is not listed, send us the duty cycle, peak current and dimensions —we will confirm whether this cell is suitable or propose an alternative.

Quality control and certification

Every production batch of the LP301630 110mAh goes through incoming material inspection, in-process checks and outgoing inspection. Capacity, internal resistance and open-circuit voltage are recorded per cell, and the batch test data can be attached to your shipment documents on request.

Incoming inspectionCell appearance, dimensions, OCV and internal resistance sampling
In-processWelding pull test, protection circuit function test, dimensional check
Outgoing100% capacity grading, IR sorting, ageing and final visual inspection
DocumentationBatch test record, COA on request
UN38.3Transport test summary issued per model
MSDS / SDSIssued per chemistry, in the language your carrier requires
IEC 62133-2Available for lithium cells and packs
CE / RoHS / REACHDeclarations for EU-bound shipments

Packing and shipping information

Lithium cells are UN Class 9 dangerous goods. We ship under UN3480 (cells alone) or UN3481 (contained in or packed with equipment) with UN-certified packaging and the correct state of charge for air transport.

UN numberUN3480 for cells shipped alone, UN3481 when packed with or contained in equipment
PackingInner box + UN-certified outer carton, cells in anti-static trays with foam separators, then UN-certified outer carton
Documents suppliedUN38.3 test summary, MSDS, sea / air transport classification report
Sea freightMost economical for full containers; typically 18–25 days to major ports
Air freightAvailable for urgent orders, state of charge limited to 30% for cells
ExpressDHL / FedEx / UPS for samples, typically 4? working days
Port of loadingShenzhen, Shanghai or Ningbo (FOB)

3,000 pcs per model for custom sizes; 500 pcs for existing tooling. Samples can be supplied before a bulk order and the sample cost is refunded against your first production order.

UN38.3, MSDS, IEC 62133-2, CE, RoHS, REACH, UL 1642 (selected models). Tell us the destination country and we will confirm which documents already cover the model you select and which have to be ordered.

7–10 days for samples; 20–25 days for production after sample approval. Urgent shipments can sometimes be pulled forward — ask us when you send the inquiry.

Custom dimensions, capacity, PCM, connectors, wire length and private-label printing.

Get pricing

Request a quote for LP301630 110mAh

Send the quantity and destination port and we will reply with unit price, lead time and freight options. Samples are available before you commit to a production order.

  • Reply within 8 working hours
  • Sample cost refunded against your first bulk order
  • Direct engineer support for specification questions

Request a quote

Tell us the model and quantity — we reply with price, lead time and shipping options within 8 working hours.

Please enter your name
Please enter your company
Please enter a valid email address
Please select your country
Please check the number
Please describe what you need
I also need

By submitting you agree to our Privacy Policy. We never share your data with third parties. Typical reply time: under 8 working hours.

Related models

Similar Lithium Polymer

Inquiry list
Chat on WhatsApp Request a Quote